11. How to enable the coaxial and optical output of R7?

You could enable the OPT/COAX output from system setting-Audio-OPT/COAX output option.

[R7 optical / coaxial no output]

Please enable the OPT/COAX output from system setting-Audio-OPT/COAX output option first.

Note: When the optical/coaxial output switch is turned on, the output will follow the standard SPDIF protocol specification.

Maximum supported sampling rate:

COAX OUT: 384kHz/24bit; DSD128 (DOP)

OPT OUT: 192kHz/24bit

The tracks exceeding the maximum sampling rate will be SRC before outputting.

[The sample rate will show in the status bar when using coaxial / optical output?]

The coaxial/optical output port of R7 is independent. The analog output and digital output can output at the same time. Besides, the XLR connector is without detection, so there is no distinction for analog output and digital output.

[No output from coaxial/optical output port in coaxial and optical decoding mode?]

Coaxial/optical decoding mode does not support coaxial/optical output.